Grease Supply




Construction Type



180 kg

4040410 Fettversorgungssystem mAXI

The Mass Grease Supply System mAXI is ideally suited to lubricate a large bearing with the correct amount of grease, for packing grease into smaller containers and for supplying a ABNOX dispensing valve of 30 to 500 cm³.

Air-operated Grease Supply System with a Grease Mass Pump and Pressure Reducing Valve for direct mounting to containers 180 kg.

Recommendation from ABNOX:

Use a maintenance unit when air supplying device contains humidity to prevent corrosion and fouling.
Use the original container and fit the right follower plate. This will avoid air pockets.
Never leave the pump system on the suction tube on the floor. Keep them away from dirt, you will avoid damage to the pump and expensive repairs.

This air-operated grease supply system consisting of:

Component partsArticle No.Quantity
Grease Mass Pump 20:1 mAXI with pressure reducing valve40464201 piece
Cover for container of external dia. max.615 mm43258001 piece
Follower plate for container internal dia. from 560 - 600 mm43248001 piece

Technical Data

Capacity container (kg)180
Container internal dia. (mm)560 - 600
Container height (mm)870
Suction tube dia. (mm)50
Suction tube lenght (mm)847
Min. / Max. temperature (°C)10 / 40
Specification for operation mediumLubricants up to NLGI 3 / 5‘000 m Pa.s
Output pressure (medium) at operating pressure 6 bar [bar]105
Output pressure (medium) at operating pressure 10 bar [bar]191
Delivery rate pro double stroke (cm3)136
Delivery rate at pump outlet [cm3/min]4242
Min. / Max. inlet operating pressure [bar]2 / 10
Inlet operating pressure (compressed air) optimum [bar]6
Max. air consumption [l/min.]920
Connection (compressed air) internal thread1/4" BSP
Connection (Medium) External Thread P1/2" BSP

Download PDF