Do you need help?

How can we help you?

ABNOX Button zum Schliessen des Hilfe-Menüs

Contact

ABNOX AG I Headquarter
Langackerstrasse 25
6330 Cham
Switzerland
+41 41 780 44 55

Distributors

Are you looking for distributors in your area?

Instructions

Do you have any questions? All information are provided on our animations, movies and brochures

FAQ

Do you have any questions? Visit our FAQ

HD Handhebelpresse mit Manometer

High Pressure Hand Lever Pumps

Clamping Technology

High Pressure Two-hand Pump with Pressure Gauge for hydraulic clamping nuts and clamping tools.

ABNOX High Pressure Hand Lever Pump is characterized by:

  • Comfortable operation for pressure up to 700 bar
  • Controlled and accurate application, due to check valve, air bleed valve and pressure release valve
  • Generates high clamping force
  • Easy and clean disconnection of nipple due to pressure release valve and lubricant return flow to the cylinder
  • The Pressure Gauge serves as control tool for clamping or precise controlled pressure build-up for tool chucks

Note:

  • The temperature has a high influence on setting the pressure to the clamping unit and on the choice of the High Pressure Two-hand Pump. If the temperature falls, pressure also drops, and vice versa. Differences in temperature of more than 30°C will most probably require a further setting of the pressure to the clamping unit. Regular controls have to be done.
  • Only 400 g cartridges according to DIN standard 1284 with the following dimensions may be used for the 400/500 cm3 ABNOX cylinder:

    KartuscheCartridge


Article No. Modell Design Version
High pressure hand lever pump with gauge 400 bar / 400 / 500 cm3 / piston rod / M10 x 1 / filler cap Bild
3042111 400 bar / with Filler Cap 400 / 500 cm3 / Piston Rod M10 x 1

loading...

High pressure hand lever pump with gauge 400 bar / 400 cm3 / chain / M10 x 1 Bild
0005282 400 bar / without Filler Cap 400 cm3 / Chain M10 x 1

loading...

High pressure hand lever pump with gauge 700 bar / 400 / 500 cm3 / piston rod / M10 x 1 / filler cap Bild
3042011 700 bar / with Filler Cap 400 / 500 cm3 / Piston Rod M10 x 1

loading...