Go back
How can we help you?
Lubricating Gun for Lubrication Equipment 60:1
|
4850000 / 4850500 / 4851000 / 4851200 | Lubricating Gun | For Lubrication Equipment 60:1 | With or without Elements |
Lubricating Gun for Lubrication Equipment 60:1
Article No.
4850000 / 4850500 / 4851000 / 4851200
Modell
Lubricating Gun
Design
For Lubrication Equipment 60:1
Version
With or without Elements
Selection Lubricating Gun for Lubrication Equipment 60:1
| Article No. | Standard Lubricating Gun without Elements | With Rigid Angled Feed Tube and Four-piece Hydraulic Connector | With Z-Swivel | With Grease Meter |
|---|---|---|---|---|
|
4850000
|
YES
|
NO
|
NO
|
NO
|
|
4850500
|
YES
|
YES
|
NO
|
NO
|
|
4851000
|
YES
|
YES
|
YES
|
NO
|
|
4851200
|
YES
|
YES
|
YES
|
YES
|
Lubricating Gun equipped with the following individual Elements
Technical Data
Input medium specification
Schmierstoffe bis NLGI 3 / 5'000 mPa s.
Connection medium inlet internal thread
G 1/4'' (AGR - mit Dichtkegel 60°, gerade)
Connection medium outlet internal thread
G 1/8"
The Grease Meter (Article-No. 2404300) can be mounted on the Drum Hand-operated Pump or a Lubrication Equipment 60:1, respectively a Lubricating Gun fed by an external Device.
A simple push on a button will set the Meter at zero and the metering can be started. The result is shown in large (9 mm) and clear digits. The result can by expressed in ccm, g, oz or fl oz (Fluid ounce). Regardless of which units are used, the Grease Meter can be calibrated to shown a precise reading.