Go back
Comment:
Attention: The smallest dosing quantity can only be achieved under optimum conditions!
How can we help you?
Volumetric Metering Valve AXDV-C1.25-LUER
|
0015467 | AXDV-C1.25 (V3.0) | Connection LUER | 3 - 60 mm3 |
Volumetric Metering Valve AXDV-C1.25-LUER
Article No.
0015467
Modell
AXDV-C1.25 (V3.0)
Design
Connection LUER
Version
3 - 60 mm3
Dosing Needle Adapter (LUER Connection)
Available as an Option: Dispensing Nozzle Adapter with output connection internal thread 1/8" BSP
To convert the Metering Valve with 1/8" BPS internal thread outlet connection, the Dosing Nozzle Adapter option (Art. no. 0002230) is suitable for mounting standard nozzles on the pressure outlet. For further options, see the list of upgrading options below!
Connection diagram / Circuit diagram:
- Connection compressed air «dosing stroke» DP: Air supply for starting the dosing process via an external 5/2-way Pneumatic Valve
- Connection compressed air «load stroke» LP: Air supply to load the valve for a new process via an external 5/2-way Pneumatic Valve
- Connection medium M: to the Pump / Material Supply
Graphic switch-on and switch-off times
Seal Kit / Spare Part
Further information can be found below in the Downloads section under ''Spare Parts List / Seal Kit''.
| Description | Article No. |
|---|---|
|
Seal Kit |
0015805 |
|
Valve Inner Parts special complete AXDV-C1.25, |
Upgrading options
** Important note: When using a bent Dispensing Tip, it is necessary to use a rotatable Dispensing Tip Adapter (Art.-No. 0006790)!
| Description | Article No. |
|---|---|
|
Cylinder Switch |
|
|
Dispensing Nozzle Adapter 1/8'' BSP with |
|
|
Dispensing Tip Adapter rotatable, M5, with sealing and |
|
|
Dispensing Tip Set with LUER-Connection |
|
|
Dispensing Tip Set bent 45° with LUER-Connection ** |
|
|
Dispensing Tip Set bent 90° with LUER-Connection ** |
|
|
Connecting Plate for Metering Valves AXDV-C1 and C2 |
|
|
5/2-way Solenoid Control Valve with Adapter Plate |
|
|
Valve Heater AXVH-1 |
|
|
Connection Block M5 including Sealing Plug 1/8" BSP |
|
|
Pressure Sensor DS1 |
|
|
Pressure Sensor DS2 |
Technical Data
Dosing range [cm3]
0.003 - 0.060
Description
Attention! The smallest metering can be achieved only under optimal conditions!
Input medium specification
Lubricants up to NLGI 3 / max. 1'000'000 mPa.s
Min. / max. workingpressure medium inlet [bar]
20/200
Connection medium inlet internal thread
1/8'' BSP
Connection medium inlet external thread
1/8'' BSP
Connection medium outlet internal thread
M5 / With Dispensing Tip Adapter LUER-Connection
Compressed air quality
ISO 8573-1:2020 [6:4:4]
Optimum pneumatic operatingpressure [bar]
6.0
Min. pneumatic operatingpressure [bar]
5.0
Max. pneumatic operatingpressure [bar]
7.0
Pneumatic connection internal thread
M2.5 for hose ø4/2 mm
Fastening thread
M4
Weight [kg]
0.50
In this Dosing Valve, the Dosing Needle Adapter (LUER connection) is included in the scope of delivery.