Spray Valves AXSPV




Construction Type

KLS (adhesive) Nozzle dia. 0.5 mm



0010543_AXSPV-PP-KLS-0.5-S00-DS0-RNV_ohne LFK_(0619)

The pneumatic spray valve AXSPV-PP with standard nozzle needle and KLS nozzle dia. 0.5 mm is specially designed for the application of highly viscous lubricants. This spray valve is suitable for both intermittent and continuous application. Short airways in the body allow very fast and exact cycles.

The control air is fed to the spray valve via a 5/2 way valve (not included in the scope of delivery). Atomising air is supplied via a 2/2 way valve (also not included in the scope of delivery). The needle function is: Opening and closing by air pressure / and also closing by spring pressure.

Various air cap variants and nozzle extensions allow adaptation to the desired spray pattern.

This pneumatic spray valve AXSPV-PP is equipped with:

KLS (adhesive) nozzle dia. 0.5 mm1 0009522
Nozzle needle to KLS (adhesive) nozzle dia. 0.5 mm1 0010496
Latching needle lock RNV (without electrical needle sensor) for easy adjustment of the material quantity1 0011297
Centring for air cap LFK or nozzle extension DVL1
Countersinks including centring sleeves (mounting)2

The following options are available:

Nozzle extension DVL (see accessories)
Air cap LFK (see accessories)
Retaining ring for air cap LFK 0004057
Pressure sensor DS1, 0 - 5 bar 0010469
Pressure sensor DS2, 0 - 50 bar 0009137
Raster needle lock (RNA) with electrical needle sensor 0010470
Valve heater VH 0010471
Connection cable M12x1, 4 poles, Length 10.0 m
for valve heater VH
Temperature controller set AXTR-024VDC-03500 with two alarm outputs, connection with valve heater VH 0009536

The following are available as spare parts:

Sealing screw, complete, dia. 11.5 x 21 mm / Viton®0009518
Wearing parts kit for medium and air area0009517
Wearing parts kit including sealing screw for medium and air area0009397

Technical Data

Article Number0010543
"M" Material pressure (bar)35
"SL" Control air pressure (bar)5 - 6
"ZL" Atomizing air pressure (bar)0.5 (at max. control air pressure)
Compressed air qualityISO 8573-1:2020 [6:4:4]
Connection (medium) internal thread1/8" BSP
Connection (compressed air) internal thread1/8" BSP / Push-in fitting for hose dia. 6 mm

Connection diagram / Circuit diagram:

  • Atomising air connection ZL: to 2/2-way solenoid valve

  • Control air connection SL: Close control air to 5/2-way solenoid valve

  • Control air connection SL: Open control air to 5/2-way solenoid valve

  • Material / Medium connection M: to pressure tank or pump


Assembly Instructions

Download PDF, 2.5 MB

Download PDF