LOGO_ABNOX_PDF
logo-small
Back

Material Pressure Regulators MDR

0011637

Model

MDR-LW04-1M-1DS (V3.0)

Construction Type

5 - 50 bar

Version

With inlet pressure gauge and electrical pressure switch

0011637_MDR-LW04-1M-1DS_(2353)

The new Material Pressure Regulator MDR-LW04 is equipped with an inlet pressure gauge and an electronic outlet pressure switch with display.

This Material Pressure Regulator is used to reduce pressures and to minimise the pulsation which occurs when material is conveyed using piston pumps.

The working pressure can be adjusted continuously from 5-50 bar with the preload screw and fixed with the lock nut. The ratio between the inlet and outlet pressure should ideally not exceed 5:1.

The Material Pressure Regulators are designed for handling self-lubricating media such as grease and oil.

This Material Pressure Regulator is optionally also available with a Mounting Set for direct installation on ABNOX Grease Pumps (Z-Adapter) or at the individual systems (connecting plate).

Also available as a single part:

SpecificationArticle-No.
Electrical pressure switch with display 0001670

Options:

DescriptionArticle-No.
Mounting Set "Z-Adapter" 0004323
Mounting Set "Connecting plate" 0006969
Hexagonal Angle-Key Wrench 0007308

You will find more information in the downloads section under "Dimensioned Sketsch" and "Spare Parts List"

Technical Data

0011637
Inlet Pressure (Medium) [bar]20-250
Outlet Pressure (Medium) [bar]5-50
Max. pressure (bar)250
Seal TypePTFE/FPM
connector external thread1/4" BSP
Weight (kg)1.56
Specification for operation mediumLubricants up to NLGI 3 / max. 1'000'000 m Pa.s

Downloads

Dimensioned Sketch

Download PDF, 0.6 MB

Spare Parts List

Download PDF, 1.5 MB

Technical data sheet electronic outlet pressure switch

Download PDF, 0.3 MB

Assembly Instructions Material Pressure Regulator

Download PDF, 0.9 MB

3D-Data

Download STP, 3.2 MB

Download PDF