• PlatzhalterVisualHome

    Material Pressure Regulators MDR



    MDR-LW04-1M (V3.0)

    Construction Type

    5 - 50 bar


    With outlet pressure gauge

    0006495 Materialdruckregler MDR-LW04-1M (V3.0)

    The new Material Pressure Regulator MDR-LW04 is used to reduce pressures and to minimise the pulsation which occurs when material is conveyed using piston pumps.

    The working pressure can be adjusted continuously from 5-50 bar with the preload screw and fixed with the lock nut. The ratio between the inlet and outlet pressure should ideally not exceed 5:1.

    The Material Pressure Regulators are designed for handling self-lubricating media such as grease and oil.

    The regulator can be ordered with an outlet pressure gauge (1M) or with inlet and outlet pressure gauges (2M).

    This Material Pressure Regulator is optionally also available with a Mounting Set for direct installation on ABNOX Grease Pumps (Z-Adapter) or at the individual systems (connecting plate).

    Mounting Set "Z-Adapter"0004323
    Mounting Set "Connecting plate"0006969
    Hexagonal Angle-Key Wrench0007308

    You will find more information in the downloads section under "Dimensioned Sketsch" and "Spare Parts List"

    Technical Data

    Inlet Pressure (Medium) [bar]20-250
    Outlet Pressure (Medium) [bar]5-50
    Max. pressure (bar)250
    Seal TypePTFE/FPM
    connector external thread1/4" BSP
    Weight (kg)1.56
    Specification for operation mediumLubricants up to NLGI 3 / max. 1'000'000 m Pa.s


    Dimensioned Sketch

    Download PDF, 0.2 MB

    Assembly Instructions

    Download PDF, 0.9 MB


    Download STP, 2.1 MB

    Download PDF