Single Grease Pumps



25:1 / Type S

Construction Type

Container height 400 mm


Container 1 - 5 kg

4062600 Druckluft-Fettpumpe Silikon

The Air-operated Grease Pump with pressure ratio from 25:1 is ideal applicable as feeding pump for ABNOX metering valves or as filling system.
ABNOX Air-operated Grease Pump from type S is suitable for transferring of lubricants of medium to high viscosity levels as well as silicon greases and silicon oils.
This Air-operated Grease Pump is renowned for their high efficiency as well as their extremely low noise levels. Outstanding reliability due to high quality materials, seals and special change-over valve.

Never let the pump system and especially not the suction tube rest on the floor. Keep them away from dirt, you will avoid damage to the pump and expensive repairs.

Technical Data

This Air-operated Grease Pump from type S is qualified for delivering silicon greases and silicon oils with a viscosity up to 60'000 cST.
Not suitable for hardening and abrasive media, or with abrasive filling substances!

Capacity container (kg)1 - 5
Container height (mm)400
Suction tube dia. (mm)32
Suction tube lenght (mm)402
Min. / Max. temperature (°C)10 / 40
Specification for operation mediumLubricants up to NLGI 3 / 5'000 m Pa.s
Output pressure (medium) at operating pressure 6 bar [bar]140
Output pressure (medium) at operating pressure 10 bar [bar]233
Delivery rate pro double stroke (cm3)17
Delivery rate at pump outlet [cm3/min]1'295
2 / 10
Inlet operating pressure (compressed air) optimum [bar]6
Max. air consumption [l/min.]217
Connection (compressed air) internal thread1/4" BSP
Connection (Medium) External Thread P1/4" BSP


Dimensioned Sketch

Download PDF, 0.2 MB

Spare Parts List

Download PDF, 0.9 MB

Operating Manual

Download PDF, 1 MB

Download PDF