LOGO_ABNOX_PDF
logo-small
Back

Single Grease Pumps

4046420

Model

20:1 mAXI

Construction Type

Container height 870 mm

Version

Container 180 kg

4046320 mAXI Fettpumpe 2

The Air-operated Mass Grease Pump mAXI with pressure ratio from 20:1 is ideally suited to lubricate a large bearing with the correct amount of grease, for packing grease into smaller containers and for supplying a ABNOX-dispensing valve of 30 to 500 cm3.
This Air-operated Mass Grease Pump mAXI is renowned for their high efficiency as well as their extremely low noise levels. Outstanding reliability due to high quality materials, seals and special change-over valve.

Recommendation from ABNOX:

Use a maintenance unit when air supplying device contains humidity to prevent corrosion and fouling.
Use the original container and fit the right follower plate. This will avoid air pockets.
Never leave the pump system on the suction tube on the floor. Keep them away from dirt, you will avoid damage to the pump and expensive repairs.

Technical Data

4046420
Capacity container (kg)180
Container height (mm)870
Suction tube dia. (mm)50
Suction tube lenght (mm)847
Min. / Max. temperature (°C)10 / 40
Specification for operation mediumLubricants up to NLGI 3 / 5'000 m Pa.s
Output pressure (medium) at operating pressure 6 bar [bar]105
Output pressure (medium) at operating pressure 10 bar [bar]191
Delivery rate pro double stroke (cm3)136
Delivery rate at pump outlet [cm3/min]4242
Min. / Max. inlet operating pressure [bar]2 / 10
Inlet operating pressure (compressed air) optimum [bar]6
Max. air consumption [l/min.]920
Connection (compressed air) internal thread1/4" BSP
Connection (Medium) External Thread P1/2" BSP

Downloads

Dimensioned Sketch

Download PDF, 0.1 MB

Spare Parts List

Download PDF, 0.4 MB

Download PDF