LOGO_ABNOX_PDF
logo-small
Back

Material Pressure Regulators

4852304

Model

Material Pressure Regulator

Construction Type

6 - 50 bar

Version

With 2 pressure gauges

4852304 Materialdruckregler

Attention: Phased-out model! New Article - No. 0004295

The material pressure regulator valve reduces and stabilizes material pressure. The pressure regulator is designed for self lubricating mediums as grease and oil. Plunger seals avoid penetration of the medium into the spring packing. The spring packing provides stepless output pressure regulation. A strainer (60 Mesh) is fitted into the inlet to keep impurities in the material from entering the valve. To select the right outlet pressure turn the pressure adjustment screw. With the lock nut the position of the pressure adjustment screw can be adjusted. The material pressure regulator can optionally be ordered with or without the feed pressure gauge.

Technical Data

Material feed pressure5 x outlet pressure, max. 250 bar
Range6-50 bar
Connection1/4" BSP
Dimension189 x 167 x 82mm

Downloads

Operating Manual

Download PDF, 0.2 MB

Dimensioned Sketch

Download PDF, 0.2 MB

Download PDF