
High Pressure Hand Lever Pumps
High Pressure Two-hand Pump with Pressure Gauge for hydraulic clamping nuts and clamping tools.

ABNOX High Pressure Hand Lever Pump is characterized by:
- Comfortable operation for pressure up to 700 bar
- Controlled and accurate application, due to check valve, air bleed valve and pressure release valve
- Generates high clamping force
- Easy and clean disconnection of nipple due to pressure release valve and lubricant return flow to the cylinder
- The Pressure Gauge serves as control tool for clamping or precise controlled pressure build-up for tool chucks
Note:
- The temperature has a high influence on setting the pressure to the clamping unit and on the choice of the High Pressure Two-hand Pump. If the temperature falls, pressure also drops, and vice versa. Differences in temperature of more than 30°C will most probably require a further setting of the pressure to the clamping unit. Regular controls have to be done.
- Only 400 g cartridges according to DIN standard 1284 with the following dimensions may be used for the 400/500 cm3 ABNOX cylinder:
Cartridge
Article No. | Modell | Design | Version |
![]() |
3042111 | 400 bar / with Filler Cap | 400 / 500 cm3 / Piston Rod | M10 x 1 |
loading...
![]() |
0005282 | 400 bar / without Filler Cap | 400 cm3 / Chain | M10 x 1 |
loading...
![]() |
3042011 | 700 bar / with Filler Cap | 400 / 500 cm3 / Piston Rod | M10 x 1 |
loading...