LOGO_ABNOX_PDF
logo-small
Back

Spray Valves AXSPV

001071X

Model

DVL-NN1-Dxx-Lxxx-RS015

Construction Type

Standard Nozzle / not needle-sealing

Version

Round jet 15° / 90° angled

0010715_DVL-NN1-D06-L050-RS015_(0648)

Nozzle extension DVL, not needle-sealing (NN1)

  • Spray form: Round jet 15° (spraying to the side / 90° angled)

  • For nozzle ≤ 1 mm

  • Equipped with a standard nozzle

  • Choice with or without swirl nozzle (S) 60°

The nozzle extension DVL, not needle-sealing (NN1) have been specially developed for applications in which only very little space is available for installation in machines or robots, or where spraying must be carried out through or into very small openings.

This nozzle extension is placed on the nozzle of the spray valve instead of the air cap.

Selection of nozzle extension DVL-NN1 without swirl nozzle

Article-No.ModelNozzle outside diameter (D)Nozzle length (L)Outlet nozzle bore (d)
0010715DVL-NN1-D06-L050-RS015-B01x0.7-W090-A000-S006 mm50 mmØ 0.7 mm
0010716DVL-NN1-D06-L075-RS015-B01x0.7-W090-A000-S006 mm75 mmØ 0.7 mm
0010717DVL-NN1-D06-L100-RS015-B01x0.7-W090-A000-S006 mm100 mmØ 0.7 mm
0010718DVL-NN1-D10-L050-RS015-B01x0.8-W090-A000-S0010 mm50 mmØ 0.8 mm
0010719DVL-NN1-D10-L075-RS015-B01x0.8-W090-A000-S0010 mm75 mmØ 0.8 mm
0010720DVL-NN1-D10-L100-RS015-B01x0.8-W090-A000-S0010 mm100 mmØ 0.8 mm

Selection of nozzle extension DVL-NN1 with swirl nozzle 60°

Article-No.ModelNozzle outside diameter (D)Nozzle length (L)Outlet nozzle bore (d)
0009507DVL-NN1-D10-L050-RS015-B01x0.8-W090-A000-S6010 mm50 mmØ 0.8 mm
0010721DVL-NN1-D10-L075-RS015-B01x0.8-W090-A000-S6010 mm75 mmØ 0.8 mm
0009470DVL-NN1-D10-L100-RS015-B01x0.8-W090-A000-S6010 mm100 mmØ 0.8 mm

Download PDF