Spray Valves AXSPV




Construction Type

Standard Nozzle / needle-sealing


Round jet 15° / 90° angled


Nozzle extension DVL, needle-sealing (ND0)

  • Spray form: Round jet 15° (spraying to the side / 90° angled)

  • No nozzle holder required!

  • Equipped with a standard nozzle

  • Choice with or without swirl nozzle (S) 60°

The nozzle extension DVL, needle-sealing (ND0) have been specially developed for applications in which only very little space is available for installation in machines or robots, or where spraying must be carried out through or into very small openings.

The needle-sealing nozzle extensions have very little dead space.
This means that even low-viscosity materials can be processed without the extensions running empty in the overhead position.

Selection of nozzle extension DVL-ND0 without swirl nozzle

Article-No.ModelNozzle outside diameter (D)Nozzle length (L)Outlet nozzle bore (d)
0010665DVL-ND0-D08-L050-RS015-B01x0.7-W090-A000-S008 mm50 mmØ 0.7 mm
0010666DVL-ND0-D08-L100-RS015-B01x0.7-W090-A000-S008 mm100 mmØ 0.7 mm
0010667DVL-ND0-D10-L050-RS015-B01x0.8-W090-A000-S0010 mm50 mmØ 0.8 mm
0010668DVL-ND0-D10-L100-RS015-B01x0.8-W090-A000-S0010 mm100 mmØ 0.8 mm

Selection of nozzle extension DVL-ND0 with swirl nozzle 60°

Article-No.ModelNozzle outside diameter (D)Nozzle length (L)Outlet nozzle bore (d)
0010669DVL-ND0-D10-L050-RS015-B01x0.8-W090-A000-S6010 mm50 mmØ 0.8 mm
0010670DVL-ND0-D10-L100-RS015-B01x0.8-W090-A000-S6010 mm100 mmØ 0.8 mm

Download PDF