Spray Valves AXSPV




Construction Type

Standard Nozzle / needle-sealing


Ring jet 360°


Nozzle extension DVL, needle-sealing (ND0)
Version without swirl nozzle

  • Spray form: Ring jet 360° (fan or umbrella-like spray jet)

  • No nozzle holder required!

  • Equipped with a standard nozzle

The nozzle extension DVL, needle-sealing (ND0) have been specially developed for applications in which only very little space is available for installation in machines or robots, or where spraying must be carried out through or into very small openings.

This nozzle extension DVL with the spray head ring jet 360° is ideally suited for internal spraying of cylindrical hollow bodies, e.g. pipes.

The needle-sealing nozzle extensions have very little dead space.
This means that even low-viscosity materials can be processed without the extensions running empty in the overhead position.

Selection of nozzle extension DVL-ND0

Article-No.ModelNozzle outside diameter (D)Nozzle length (L)Outlet nozzle holes (number x dia. hole)
0010652DVL-ND0-D06-L050-RI360-B12x0.4-W000-A000-S006 mm50 mm12 x Ø 0.4 mm
0010653DVL-ND0-D06-L075-RI360-B12x0.4-W000-A000-S006 mm75 mm12 x Ø 0.4 mm
0010654DVL-ND0-D06-L100-RI360-B12x0.4-W000-A000-S006 mm100 mm12 x Ø 0.4 mm
0010656DVL-ND0-D06-L050-RI360-B08x0.6-W000-A000-S006 mm50 mm8 x Ø 0.6 mm
0010657DVL-ND0-D06-L075-RI360-B08x0.6-W000-A000-S006 mm75 mm8 x Ø 0.6 mm
0010658DVL-ND0-D06-L100-RI360-B08x0.6-W000-A000-S006 mm100 mm8 x Ø 0.6 mm
0010659DVL-ND0-D08-L050-RI360-B12x0.6-W000-A000-S008 mm50 mm12 x Ø 0.6 mm
0010660DVL-ND0-D08-L075-RI360-B12x0.6-W000-A000-S008 mm75 mm12 x Ø 0.6 mm
0010661DVL-ND0-D08-L100-RI360-B12x0.6-W000-A000-S008 mm100 mm12 x Ø 0.6 mm
0010662DVL-ND0-D08-L050-RI360-B12x0.8-W000-A000-S008 mm50 mm12 x Ø 0.8 mm
0010663DVL-ND0-D08-L075-RI360-B12x0.8-W000-A000-S008 mm75 mm12 x Ø 0.8 mm
0010664DVL-ND0-D08-L100-RI360-B12x0.8-W000-A000-S008 mm100 mm12 x Ø 0.8 mm

Download PDF