Hand Lever Pump with Gauge



700 bar / with filler cap

Construction Type

400 / 500 cm3 / Piston rod


M10 x 1

3042011 HD-Handhebelpresse_Stange

High Pressure Hand Lever Pump with Gauge is used for clamping tools and face milling gutters

Einsatz HD Handpresse

More and more face milling cutters and declamping tools are hydraulically clamped.
An implemented pressroom in the tool is put under pressure through grease or oil, so that the tool as example is pressed onto the shaft of the machine.
This kind of tension enables transferring high torque and therefore reaches an exact centrical tension.

Important information:

The temperature has a high influence on setting the pressure to the clamping unit and on the choice of the high pressure one-hand pump.
If the temperature falls, pressure also drops, and vice versa. Differences in temperature of more than 30°C will most probably require a further setting of the pressure to the clamping unit. Regular controls have to be done.

Character features of High Pressure Hand Lever Pump:

  • Comfortable operation for pressure up to 700 bar, due to optimal pressure conversion ratio and precise lever motion

  • Controlled and accurate application, due to check valve, air bleed valve and pressure release valve

  • Generates high clamping force without ancillary power

  • Easy and clean disconnection of nipple due to pressure release valve and lubricant return flow to the cylinder

  • The pressure gauge serves as control tool for clamping or precise controlled pressure build-up for tool chucks

This high pressure hand lever pump is equipped with:

SpecificationArticle No.Quantity
High pressure hose 700 bar, length = 600 mm, connector M10 x 135135011 piece
4-piece hydraulic heavy-duty connector EXCELLENT, external dia. 15 mm, length = 40 mm 36552001 piece
Gauge scale 0 - 1000 bar83750011 piece
Conical filler cap with ball valve35690001 piece

Contained additional accessories in the scope of delivery the high pressure hand lever pump:

MarkingArticle No.Quantity
Rigid angled feed tube, length = 180 mm, connector M10 x 135499011 piece
4-piece hydraulic heavy-duty connector EXCELLENT, external dia. 15 mm, length = 40 mm 36552001 piece
3549901 Zerkrohr gebogen mit Mundstueck

Spare Parts:

Seal Kit3827900
Pump head cpl.3828500
Cylinder cpl.3819502
Valve kit cpl.3827500

You will find more information in the downloads section under "Seal Kit" and "Spare Parts List"

Technical Data

Version scale from gauge [bar]0 - 1000
Pressure relief valveAdjusted to 700 bar + 20 bar
Weight (kg)4.0
Capacity cylinder (cm3)400 / 500
Cylinder external dia. (mm)58
Cylinder lenght (mm)300
Cylinder wall thickness (mm)1.5
Filling with grease cartridge 400g DIN 1284YES
Filling with hand or filler pumpYES / 500 g
Min. / Max. temperature (°C)10 / 40
Specification for operation mediumLubricants up to NLGI 3 / 5000 m Pa.s
Operating pressure (bar)min. 300 / max. 700
Max. pressure (bar)1000
Delivery rate pro stroke (cm3)0.35
Connection (medium) internal thread PM10 x 1
Connection (air vent) internal thread EM8 x 1
Connection (filter cap) internal thread F1/8" BSP
Connection (gauge) internal thread M1/4" BSP


Dimensioned Sketch

Download PDF, 0.3 MB

Spare Parts List

Download PDF, 1.2 MB

Seal Kit

Download PDF, 0.8 MB

Instruction Manual

Download PDF, 0.5 MB

Download PDF